DEX, swaps & DeFi

Top 8 Decentralized Exchanges on Polygon (2026)

Compare QuickSwap, Uniswap, Curve, KyberSwap, 1inch and other Polygon DEXs by swap routing, pool fees, liquidity options and trading risks.

Tools at a glance

8 listed tools
  1. QuickSwap
  2. Uniswap
  3. SushiSwap
  4. Curve Finance
  5. DODO
  6. KyberSwap
  7. 1inch
  8. WOOFi

Polygon decentralized exchanges let you swap tokens from a self-custody wallet, but their liquidity models and execution methods differ. QuickSwap, Uniswap, SushiSwap, Curve, DODO and WOOFi provide trading liquidity, while KyberSwap and 1inch help access multiple liquidity sources or alternative order execution methods. This comparison is based on each provider's official documentation and published features, checked in November 2026; we have not tested the tools hands-on.

Which one to pick

  • Direct Polygon spot swaps: QuickSwap, with V2 pools and dynamic-fee V3/V4 liquidity.
  • Access to multiple AMM versions: Uniswap, with V2, V3 and V4 available on Polygon.
  • Stablecoin conversions: Curve Finance, with pool designs for assets expected to trade near parity.
  • Customizable liquidity routing: KyberSwap, with exchange filtering and aggregated quotes.
  • Intent-based trading: 1inch, with Fusion execution and an advanced trading terminal.
  • Cross-chain token swaps: WOOFi, with supported routes combining trading and transfers between networks.

Compare Polygon DEX execution and fees

ToolType or Best forExecution route on PolygonPrice
QuickSwapAMM pools and aggregationV2, V3 and V4 markets; Best Trade routes across pools and external sourcesV2: 0.3%; V3: dynamic fees; V4: plugin-dependent fees; gas extra
UniswapMultiversion AMMV2, V3 and V4 liquidity through UniswapNo Labs interface fee; applicable protocol, pool and network costs
SushiSwapMultichain swapsAMM pools and routed swapsV2: 0.3%; V3: tiered pool fees; other quoted costs
Curve FinanceStable and correlated assetsStableSwap and CryptoSwap poolsPool-specific, sometimes dynamic fees; gas extra
DODOPMM liquidity and aggregationDODO pools plus external routing sourcesSmartTrade route: 0.1%; pool fees and gas may apply
KyberSwapMulti-DEX route comparisonAggregator with selectable liquidity sourcesNo KyberSwap protocol swap fee; LP and gas costs
1inchIntent and advanced ordersFusion, Classic aggregation and cross-chain executionMode-dependent gas and infrastructure costs
WOOFiOracle-priced and cross-chain swapssPMM liquidity and cross-network routingTrading fee in quote; network and transfer costs vary

The tools

QuickSwap

Polygon-focused AMM

Type or Best forAMM pools and aggregationPriceV2: 0.3%; V3: dynamic fees; V4: plugin-dependent fees; gas extra

QuickSwap supports Polygon PoS alongside several other EVM networks. Traders can exchange ERC-20 tokens against automated liquidity pools, while liquidity providers deposit assets into the protocol's pool designs. Its documentation lists a fixed 0.3% V2 swap fee, variable V3 fees and V4 plugins that can change pool fee rules. The interface also provides access to features beyond ordinary spot swaps, including limit orders and liquidity aggregation. Pool selection matters because a token may have liquidity distributed across different versions. Compare the execution amount rather than assuming the familiar V2 fee produces a cheaper trade.

Choose it when you want direct access to Polygon AMM liquidity and established pool choices.

Watch out for fragmented liquidity between pool versions and changing V3/V4 transaction costs.

Uniswap

Multiversion AMM liquidity

Type or Best forMultiversion AMMPriceNo Labs interface fee; applicable protocol, pool and network costs

Uniswap's official support documentation lists Polygon as compatible with its web interface and V2, V3 and V4 protocols. These versions offer different liquidity arrangements, including concentrated positions and newer pool customization mechanisms. The swap screen displays routing, network costs, applicable fees and price impact before confirmation. Uniswap Labs states that its interface fee is 0%, separate from any protocol or liquidity charges. Token availability does not establish that a particular pool has sufficient depth.

Choose it when you trade across different AMM generations and want detailed execution information.

Watch out for variable pool costs and price movement during transaction submission.

SushiSwap

AMM swaps across chains

Type or Best forMultichain swapsPriceV2: 0.3%; V3: tiered pool fees; other quoted costs

Sushi provides a Polygon swap interface with token selection, routing information, slippage settings and estimated network costs. Its published fee documentation specifies a 0.3% trading charge for V2 pools, while V3 offers fee tiers of 0.01%, 0.05%, 0.3% and 1%. Those underlying pool rates should not be confused with the complete fee displayed for a routed transaction.

Choose it when you already use Sushi pools or its routing interface produces a suitable trade.

Watch out for differences between underlying AMM fees and the final swap-screen estimate.

Curve Finance

Liquidity for correlated assets

Type or Best forStable and correlated assetsPricePool-specific, sometimes dynamic fees; gas extra

Curve specializes in automated liquidity pools with different designs for particular market structures. StableSwap targets assets expected to maintain similar values, including stablecoin pairs and certain wrapped assets. CryptoSwap supports assets with independently moving prices. Curve operates a Polygon interface, but each network has its own available pools. Official documentation sets StableSwap fees per pool and describes higher fees when pools move off peg. CryptoSwap fees can differ substantially. A pool can also become imbalanced, changing execution costs even when the quoted tokens are normally close in value. Examine the specific pool before converting a large position.

Choose it when a supported stablecoin or correlated-asset pool has adequate liquidity.

Watch out for pool imbalance, dynamic trading charges and limited availability of individual pairs.

DODO

Proactive market making and routing

Type or Best forPMM liquidity and aggregationPriceSmartTrade route: 0.1%; pool fees and gas may apply

DODO combines its proactive market maker architecture with an aggregator that can access external pools. Its official liquidity-source documentation lists Polygon integrations spanning DODO versions, QuickSwap, SushiSwap, Uniswap, Curve and other protocols. This allows SmartTrade to consider liquidity outside DODO's own market-making contracts. The published route charge is 0.1% for SmartTrade swaps, while liquidity-provider fees differ between pools. Check whether the route uses native DODO liquidity or combines external venues. Review the complete output and included costs rather than evaluating the routing charge in isolation.

Choose it when a PMM pool or SmartTrade route matches your token pair and size.

Watch out for route-dependent fees and uneven availability of external liquidity sources.

KyberSwap

Configurable DEX aggregation

Type or Best forMulti-DEX route comparisonPriceNo KyberSwap protocol swap fee; LP and gas costs

KyberSwap aggregates liquidity from decentralized exchanges and lets traders customize which sources are considered when building a route. Its published network matrix confirms Polygon PoS support for aggregation, limit orders, stop-market orders, liquidity zaps and cross-chain swaps. The aggregator is particularly useful when direct pools are fragmented or when you want visibility into the exchanges included in execution. KyberSwap's fee schedule says direct aggregator swaps carry no protocol fee, but positive-slippage and dust collection may apply; network gas and pool costs remain. Exchange filtering gives control over route selection, but excluding a venue can also reduce the liquidity available for a trade.

Choose it when you need aggregated Polygon quotes with control over eligible exchanges.

Watch out for incomplete route coverage and restrictive filters that produce less favorable output.

1inch

Intent-based swaps and advanced orders

Type or Best forIntent and advanced ordersPriceMode-dependent gas and infrastructure costs

1inch supports Polygon through conventional DEX aggregation, Fusion intent-based execution and cross-chain swaps. Its streamlined Swap interface uses resolvers to fill eligible Fusion orders, usually covering execution gas themselves. The advanced Terminal provides market and limit modes, charts and routing information. Official fee guidance distinguishes ordinary gas-paying transactions from resolver-filled swaps and explains that infrastructure charges can depend on the execution method. Fusion orders also follow a price-based filling process rather than behaving exactly like an immediate AMM transaction. Some trades may be routed through conventional aggregation, and a first-time token approval can still require POL.

Choose it when you want intent execution or terminal-style controls alongside liquidity aggregation.

Watch out for pending or unfilled intents, approval costs and execution-mode differences.

WOOFi

Oracle-based liquidity and cross-chain trading

Type or Best forOracle-priced and cross-chain swapsPriceTrading fee in quote; network and transfer costs vary

WOOFi uses synthetic proactive market making, or sPMM, to quote swaps with on-chain pricing inputs rather than relying solely on constant-product pool balances. Its developer documentation publishes Polygon PoS router and liquidity-contract addresses. The swap interface provides an estimated receiving amount, trading fee and exchange rate. WOOFi also supports cross-chain workflows that can combine swaps and bridging operations into one user-initiated process. Its available markets depend on supported token inventories and routes, not simply whether a token exists on Polygon.

Choose it when WOOFi supports your assets and offers a suitable swap or cross-chain path.

Watch out for restricted token coverage and dependencies on external cross-chain settlement infrastructure.

How to compare Polygon DEX quotes before swapping

  1. Verify the network and trading assets. Connect a compatible wallet to Polygon PoS, which uses chain ID 137. Confirm both token-contract addresses through their official issuers or project documentation. Keep enough POL available for transactions requiring gas.
  2. Identify the relevant liquidity model. Start with QuickSwap or Uniswap for ordinary ERC-20 pairs. Inspect Curve for stablecoins or assets expected to track one another. Check DODO or Sushi when their available pools match the market you want.
  3. Request quotes for identical amounts. Enter the same input quantity on two direct exchanges and an aggregator such as KyberSwap or 1inch. Refresh the estimates close together because pool reserves, prices and available routes can change.
  4. Compare total execution value. Record expected output, price impact, displayed trading charges and gas. Check whether a route is direct or passes through several pools. Account for any extra approval transaction rather than comparing percentage fees alone.
  5. Set an acceptable execution boundary. Inspect minimum received and slippage tolerance. A wider tolerance permits more adverse price movement before execution fails. Check the aggregator's route information and ensure the output contract matches the asset you intend to hold.
  6. Confirm permissions and settlement. Review the spender address and approval amount in your wallet. Refresh the quote before signing, submit only if the transaction details remain acceptable, and inspect the completed on-chain receipt and resulting token balance.

Worked example (illustrative): Suppose you want to exchange 2,000 USDC for a hypothetical Polygon token called XYZ. QuickSwap displays 1,880 XYZ, while a KyberSwap route estimates 1,895 XYZ; these are invented figures, not live prices. With a 0.5% slippage setting, the illustrative minimum amounts would be 1,870.6 and 1,885.525 XYZ respectively, assuming each interface applies that percentage directly to its quoted output. Compare the actual network costs, spending permissions and route details before selecting the transaction, rather than treating the 15-token quote difference as guaranteed savings.

Polygon DEX execution and wallet risks

Malicious token contracts can block sales, impose unexpected transfer taxes or imitate legitimate assets, while compromised interfaces and fraudulent wallet prompts can expose funds. Public transactions are also vulnerable to MEV strategies such as sandwich attacks; use conservative slippage limits and independently verify unfamiliar contracts before interacting with them. For significant balances, keep trading funds separate from long-term holdings, periodically revoke unnecessary allowances, and remember that smart-contract failures, stablecoin depegs and bridge incidents can cause losses even when a swap interface displays a normal quote.

Frequently asked questions

How should I choose a DEX on Polygon?

The right route depends on the pair, order size and available liquidity; compare net output after fees and gas.

How do fees compare across Polygon DEXs?

That depends on the pool, trade size and execution path. A lower percentage fee can still produce a worse result if liquidity is shallow, so compare the expected output after relevant costs.

Can I swap on Polygon without holding POL?

Most ordinary Polygon transactions require POL for network gas. Certain 1inch Fusion swaps use resolver-funded execution, but initial permissions and some other transaction types may still require a native-token balance.

Can I place limit orders on Polygon DEXs?

Yes. QuickSwap and KyberSwap list Polygon limit-order support, and 1inch Terminal offers limit orders on supported networks; fills depend on market and product conditions.

Can I swap Polygon tokens directly to another blockchain?

WOOFi and 1inch provide cross-chain trading workflows, subject to supported source networks, destination chains and token routes. A cross-chain transaction has different settlement conditions from a swap entirely within Polygon.

Does slippage tolerance guarantee the quoted token amount?

No. The estimate can move before execution, while the minimum-received threshold limits how much deterioration you permit. If the transaction cannot satisfy its execution conditions, it may fail and still consume gas.

Sources

Show all 20 sources