DEX, swaps & DeFi

Top 7 Decentralized Exchanges on Base (2026)

Compare Aerodrome Finance, Uniswap, 1inch, PancakeSwap, Curve, SushiSwap and Maverick on Base liquidity, swap routing, fees and trading risks.

Tools at a glance

7 listed tools
  1. Aerodrome Finance
  2. Uniswap
  3. 1inch
  4. PancakeSwap
  5. Curve Finance
  6. SushiSwap
  7. Maverick Protocol

For trading tokens on Base, start with Aerodrome Finance's successor Aero or Uniswap for direct pool access, and compare 1inch when execution price matters. This comparison is based on each provider's official documentation and published features, checked in November 2026; we have not tested the tools hands-on.

Which one to pick

  • Base-native token trading: Aerodrome Finance, now part of Aero, for its Slipstream liquidity pools and cross-chain routing.
  • General-purpose spot swaps: Uniswap, for access to v2, v3 and v4 liquidity through one interface.
  • Comparing execution routes: 1inch, for liquidity aggregation and intent-based Fusion orders.
  • Configurable swap routing: PancakeSwap, for its Smart Router, concentrated liquidity and PancakeSwap X.
  • Stablecoin and correlated-asset pairs: Curve Finance, for its specialized StableSwap pools.
  • Directional liquidity strategies: Maverick Protocol, for automated liquidity distribution as prices change.

Compare Base DEX liquidity, execution and fees

ToolBest forLiquidity and executionPrice
Aerodrome FinanceBase token swaps and concentrated liquidity managementAero Slipstream pools with multichain Metaswaps routingMarket-dependent swap fees
UniswapVersatile spot swaps across supported networksv2, v3 and v4 pools with configurable liquidity0% interface fee; v3 tiers: 0.01%, 0.05%, 0.30%, 1%; v4 pool-set fees
1inchOptimizing quotes across decentralized liquidity sourcesAggregated routes and auction-based Fusion executionInfrastructure fees up to 5 bps on stable pairs, 30 bps otherwise; Fusion resolvers pay gas
PancakeSwapFlexible pool selection and swap executionSmart Router, Infinity pools and PancakeSwap X ordersv3: 0.01%, 0.05%, 0.25%, 1%; PancakeSwap X fillers pay execution gas
Curve FinanceStablecoin and similarly valued asset swapsStableSwap pools with asset-specific reserves and parametersIndividual pool contract fees
SushiSwapAlternative Base quotes and multichain tradingAMM pools with route-specific execution and price impactCharges vary by swap route
Maverick ProtocolLiquidity strategies responding to directional price movementDynamic Distribution AMM with configurable liquidity shiftsPool-set swap fees

The tools

Aerodrome Finance

Base liquidity through Aero

PriceMarket-dependent swap fees

Aerodrome began as a Base-focused decentralized exchange using conventional AMM pools and Slipstream concentrated liquidity. Aero launched on October 21, 2026 at 8 p.m. EDT (October 22 UTC), merging Aerodrome and Velodrome into one exchange across seven EVM networks. Aero's current Slipstream design adjusts swap fees according to market conditions and rewards liquidity active within selected price ranges. Its Metaswaps system can also route transactions between supported chains using connected onchain pools. sAERO stakers direct liquidity-provider incentives through Predictive Allocation.

Choose it when trading a Base asset supported by Aero liquidity or managing a Slipstream position.

Watch out for variable fees and the distinction between legacy Aerodrome positions and Aero's newer staking and liquidity mechanisms.

Uniswap

Multichain swaps and configurable pools

Price0% interface fee; v3 tiers: 0.01%, 0.05%, 0.30%, 1%; v4 pool-set fees

Uniswap supports Base through its web interface and offers v2, v3 and v4 protocol liquidity. The versions differ substantially: v2 uses a conventional constant-product pool, v3 concentrates liquidity inside selected price ranges, and v4 adds programmable hooks and more flexible fee configurations. Published v3 fee tiers are 0.01%, 0.05%, 0.3% and 1%, although only pools created for a particular pair are available to trade. Uniswap Labs states that its interface fee is 0%, separate from protocol-level charges. Its interface also supports Base through UniswapX and offers cross-chain swaps for supported assets.

Choose it when you need established pool infrastructure across multiple networks and control over liquidity positions.

Watch out for inactive concentrated-liquidity ranges and customized v4 hooks that introduce pool-specific behavior.

1inch

Aggregated liquidity and intent execution

1inch is a DEX aggregator rather than a single trading pool. Its Classic mode constructs transactions using available decentralized liquidity, while Fusion allows resolvers to fill signed orders through an auction mechanism. On eligible Fusion swaps, the resolver covers execution gas, although the economics of that cost are reflected in the trade and initial approvals may require ETH. The standard Swap interface emphasizes intent-based execution; its advanced Terminal provides Market and Limit modes, charts and routing controls. For resolver-filled Swap and Limit orders, takers cover infrastructure fees; on Classic routes, traders cover them.

Choose it when comparing quotes across liquidity sources or using resolver-filled transactions.

Watch out for Fusion orders that expire without filling and gas charges on Classic routes or eligible approval transactions.

PancakeSwap

Multiple trading and routing mechanisms

Pricev3: 0.01%, 0.05%, 0.25%, 1%; PancakeSwap X fillers pay execution gas

PancakeSwap operates on Base with concentrated-liquidity pools and several execution options. Its v3 design offers four published fee tiers, letting liquidity providers position capital according to their selected market and range. The Smart Router can combine supported liquidity sources and expose route details before confirmation. PancakeSwap Infinity introduces concentrated-liquidity and bin-based pool designs with programmable hooks. PancakeSwap X, also supported on Base, uses offchain orders filled by liquidity providers and can remove the need for traders to pay execution gas directly. The interface selects eligible routing mechanisms based on the trade, so not every transaction uses the same execution path.

Choose it when examining different pool configurations or using an alternative intent-based route.

Watch out for differences between v3, Infinity and PancakeSwap X, including whether a particular token pair qualifies for each mechanism.

Curve Finance

Specialized stable-asset liquidity

PriceIndividual pool contract fees

Curve Finance provides automated market makers for stablecoins, pegged assets and other token combinations. Its StableSwap design is intended for assets trading near a common value, while separate pool implementations accommodate more volatile pairs. Curve's official deployment directory includes contracts on Base, but specific asset availability depends on individual pools. Traders can inspect the reserves and parameters of an available pool rather than assuming a stablecoin pair has sufficient depth. Curve also supports liquidity-provider positions and associated incentive mechanisms where configured. Fees are determined by pool contracts, not a universal exchange-wide percentage, making the actual quote the relevant comparison point.

Choose it when swapping two supported assets that are expected to maintain a similar value.

Watch out for limited availability of particular Base pairs and exposure to assets that lose their intended peg.

SushiSwap

Multichain AMM trading

PriceCharges vary by swap route

SushiSwap offers token trading and liquidity provision across multiple networks, including Base. Its official Base swap interface displays the selected tokens, routing source, price impact, minimum received and applicable charges. The broader Sushi product also supports cross-chain activity, with dedicated Base instructions for bridging, trading and providing liquidity. Sushi can provide a useful independent quote when another DEX shows unfavorable execution for a specific order size. Traders managing liquidity must distinguish straightforward pool deposits from concentrated positions with separately configured trading ranges.

Choose it when checking alternative Base liquidity or maintaining activity across Sushi-supported chains.

Watch out for pair-specific market depth and trade charges that depend on the route rather than one fixed platform rate.

Maverick Protocol

Dynamic liquidity distribution

PricePool-set swap fees

Maverick Protocol uses a Dynamic Distribution AMM designed to change how liquidity is concentrated as market prices move. Instead of relying entirely on static liquidity placement, its strategies can follow price movement under defined conditions, including direction-specific configurations. Maverick V2's official contract repository documents deployments on Base, including factory, quoting and router contracts. Traders can swap through available pools, while liquidity providers choose configurations reflecting their market expectations.

Choose it when managing a position that requires a defined liquidity movement strategy.

Watch out for directional exposure, strategy complexity and the possibility that a pool has insufficient reserves for your order.

How to swap tokens on Base with less slippage

  1. Prepare a wallet on Base. Select the Base network, confirm that your input asset is already on that chain and retain sufficient ETH for any transaction or approval costs. If your funds are elsewhere, use a supported cross-chain transfer before submitting a normal Base swap.
  2. Identify the exact token. Copy the contract address from the project's authoritative documentation rather than relying on a ticker search. Check the asset's contract and permissions before connecting it to a trading interface; use a token scanner as one input to your checks.
  3. Get comparable quotes. Enter the same input amount and token contracts in Aero and Uniswap, then inspect 1inch. For an appropriate pair, also compare PancakeSwap, SushiSwap or Curve. Refresh the quotes close together because market conditions can change between requests.
  4. Inspect execution details. Record the expected output, minimum received, route, fees and gas estimate. A multihop transaction may expose the order to several pools, while an aggregator may use a resolver rather than directly executing a conventional AMM swap.
  5. Adjust your order. Evaluate how slippage and liquidity affect a trade. If price impact is material, compare smaller order sizes and calculate whether multiple executions improve net proceeds after accounting for transaction costs. Set a slippage tolerance consistent with the token's volatility and liquidity.
  6. Authorize and verify. Confirm the spending permission, router address, network and output threshold in your wallet. Submit the trade only after inspecting those details, then verify the transaction receipt and actual token balance rather than relying exclusively on an interface success message.

Worked example (illustrative): Suppose you want to exchange 2,000 USDC for USDT on Base. Aero quotes 1,995.80 USDT with an estimated $0.04 gas charge, while an eligible 1inch Fusion order quotes 1,997.10 USDT with resolver-paid execution gas. The second route offers 1.30 more USDT before accounting for any separate approvals, but its final benefit depends on whether the order fills within the quoted terms. At 0.2% slippage tolerance, an indicative minimum based on the second quote would be approximately 1,993.11 USDT, subject to the interface's exact execution calculation.

Base DEX trading risks

Permissionless token markets can contain impersonator contracts, restrictive transfer logic and liquidity that can disappear after you enter a position; confirm contract addresses and test exit conditions before committing substantial capital. Smart-contract exploits, MEV, failed transactions and excessive allowances can create losses even when the displayed quote looks acceptable, so limit approvals and review what your wallet is signing. Providing liquidity adds impermanent-loss or inventory risk, while cross-chain transfers introduce bridge, messaging and settlement risk.

Frequently asked questions

Which decentralized exchange should I use on Base?

Aerodrome Finance's successor Aero and Uniswap are practical starting points for direct liquidity. Compare the same order with 1inch because the venue with an attractive displayed fee may still produce fewer tokens after execution costs.

Is Aerodrome Finance now called Aero?

Aero launched on October 22, 2026, following the Aerodrome and Velodrome merger. Existing Aerodrome users should distinguish the legacy protocol and token positions from their corresponding Aero upgrade process.

Does 1inch have its own liquidity pools on Base?

Its Swap and Terminal products aggregate liquidity or use resolver-filled orders. 1inch also supports Aqua shared liquidity on Base, where assets remain in LP wallets until execution.

Which Base DEX supports limit orders?

1inch Terminal documents Market and Limit trading modes on supported EVM networks. An order's available execution options depend on the selected asset and network, and submitting an order does not guarantee a fill.

Can I swap on Base without paying gas?

Some 1inch Fusion and PancakeSwap X transactions use resolvers or fillers that cover execution gas. That does not mean the trade has no economic cost, and wallet approvals or transactions using other routes can still require ETH.

Are stablecoin swaps on Curve free from price risk?

No. StableSwap is designed around particular asset relationships, but it cannot guarantee that stablecoins retain their pegs or that sufficient liquidity remains available during market stress.

Sources

Show all 18 sources